-
Isolating Switching Power Supply ModuleSupply voltage: 85V~265V (AC input voltage range 100V~240VAC). Output voltage: 12V. Output Current: Maximum 250mA. Output Power: 3W. Efficiency: 73% typical. Minimum Supply Voltage: There are several
-
Ultra-thin AC-DC ModuleInput Voltage. AC input voltage range: 85~305VAC. DC input voltage range: 100~430VDC (AC and DC, same terminal input). Output Voltage and Current. Output Voltage: 12V. Output Current: 830mA. Output
-
Universal Input AC-DC ModuleSelectable range: 85~132VAC/170~264VAC or 248~373VDC by switch selection.. Output Voltage. Rated: 24VDC.. Adjustable range: 21~28V (may vary slightly in some literature, but usually within this
-
High Power AC-DC Power SupplyPower: 1008W. Power density: up to 10.7 watts per cubic inch. Efficiency: High (specific efficiency values may vary depending on actual application conditions, but are typically high). Voltage
-
Waterproof LED Driver Power SupplyBrand: Mean Well. Manufacturer Number: HLG-40H-36B. Power Supply Type: CV+CC (Constant Voltage + Constant Current). Power Supply Unit Type: Switching Mode. Output Power & Voltage Current:. Output
-
Small LED Light Power SupplyBrand: Mean Well, trademark MW.. Model: LPV-35-24.. Input voltage: 90264VAC or 127370VDC.. Output voltage: 24V.. Output current: 1.5A.. Output Power: 35W.. Output voltage accuracy: ±5%.. Output
-
Power Module Without Isolation SwitchInput voltage: 24V (input voltage range 21.6V~26.4V). Output voltage: 5Vdc. Output current: 200mA. Output Power: 1W. Conversion Efficiency: 79% typical (some profiles may show different conversion
-
High Frequency Switching Power SupplyPackage type: DIP-14, SOIC-16.. Number of pins: 14.. Supply Voltage: 10V~20V. It is also claimed that its gate drive supply ranges from 3.3V to 20V, or -0.3V~+25V.. Offset Voltage: 500V (some say up
-
Wide Input Range Switching Power SupplyInput voltage range: 180VAC~550VAC (or 254VDC~780VDC). Output voltage: 24VDC (maximum output voltage is 28VDC). Output current: 10A. Output power: 240W. Output Voltage Accuracy: ± 1%. Ripple and
-
High Power Switching Power Supply ModuleRegular input range: 88~264V AC (some claims suggest 6AV~264V AC, but 88~264V AC is a more common specification). This indicates that the power supply is able to work properly with AC voltages within
-
Low Noise Switching Power Supply ModuleInput Voltage Range: 2.7V to 5.5V. This means that the LM27762 can operate normally within this voltage range and provide a stable voltage to its output.. Output Voltage Range: ±1.5V to ±5V. The
-
Intelligent Switching Power Supply ModuleBrand and Manufacturer: HLK (HLK Electronics) or Hi-Link (HLK). Number of pins: 4Pin. Isolation Voltage: 3kV@AC. Output Current: 250mA (Max). Efficiency (Typ): 73%. Output Voltage: 12V. Output Power:
An LED driver is an electronic circuit that generates a constant output current from the supply voltage. This controls the LEDs integrated in the lamp. In electrical engineering, this circuit is...
Constant Current. LED Lighting Drivers High-Efficiency, 40V Step-Up Converters for 2 to 10 White LEDs. +3 images. MAX1553ETA+T. Maxim Integrated. 1: $3.50. 3,086 In Stock. Previous purchase....
Constant Current LED Driver 1W 3W 5W 10W 20W 30W 50W 100W LED Power Supply. $3.47. $3.69. + $2.50 shipping. Hover to zoom....
The A011 series LUXdrive™ FlexBlock LED buck-boost constant current driver is a low voltage DC input module for powering high-brightness LEDs. PART #: 0A011-D-V-xxx $21.99 $19.99 LDB-L Series MEAN...
LED Driver - LED Driver ICs High-brightness LED drivers are integrated circuits that are optimized to efficiently drive strings of high-brightness LEDs. Maxim's continually expanding portfolio...
A constant voltage LED driver delivers a tightly regulated output voltage across all load conditions to the LED light (s). Typically, these units are mains-powered AC-DC power supplies specifically...
