Lithium Battery Protection IC

ORIGIN~1

Details:

Minimum/Maximum Operating Temperature: Typically -10°C to 80°C (some sources indicate a minimum operating temperature of -50°C and a maximum operating temperature of 100°C, depending on the specific package and lot).
Minimum/Maximum Supply Voltage: Minimum supply voltage is typically between 2V and 4V (some sources indicate a minimum supply voltage of 1V).
Maximum supply voltage is typically between 6.5V and 8.5V (common values are 6.5V or 7V).
Power:
The type is driver IC, the power may vary depending on the specific application, but usually not very high.
Package: SOT23-6, which is a common form of surface mount package.
Length is usually between 8.7mm and 9.5mm.
Width is between 2.8mm and 3.7mm.
2-in-1 lithium protection: integrated overcharge, overdischarge, overcurrent and short circuit protection.
High-precision voltage detection: able to accurately detect the battery voltage to ensure that the battery works within the safe range.
Low current consumption: low current consumption in both working mode and power-down mode.

Send Inquiry

Description

Send Inquiry

Lithium battery protection IC XB5306AOvercharge protection: When the battery voltage exceeds the preset safe upper limit, XB5306A will cut off the charging current to prevent the battery from being damaged by overcharging.

Over-discharge protection: When the battery voltage drops to the preset safe lower limit, XB5306A will cut off the discharge current to prevent the battery from being damaged or shortened service life due to over-discharge.

Over-current protection: When the battery charging and discharging current exceeds the preset safety range, XB5306A will limit the current or cut off the connection between the battery and the load to prevent damage or safety hazards caused by over-current.

Short circuit protection: When a short circuit occurs between the lithium battery and the load, XB5306A will immediately cut off the connection between the battery and the load to prevent the battery from over-discharging or overheating.

Over-temperature protection: XB5306A can monitor the temperature of the lithium battery, when the temperature is too high, it will automatically take measures (such as restricting the current or cutting off the connection between the battery and the load), in order to prevent the battery from being damaged due to overheating or causing potential safety hazards.