-
Waterproof AC-DC Power SupplyInput Voltage: Selectable 90~132VAC or 180~264VAC, 47~63Hz. Output voltage: 24V (other voltage versions such as 5V, 7.5V, 12V, 13.5V, 15V, 27V, 48V, etc.). Output power: 350W. DC voltage adjustable
-
Industrial Grade AC-DC Switching Power SupplyPVA150-27B35. Power: 150W. Input Voltage: 85-305VAC, which suggests that it can work properly over a wide range of voltages. However, it is worth noting that there are also claims that this series of
-
Micro AC-DC Module Power SupplyInput Voltage: 85~264V AC, which is a wide input voltage range, making the power module adaptable to different AC power environments.. Output Voltage: 24V DC, which is a fixed DC output voltage,
-
High Efficiency AC-DC Power ConverterSupply voltage (VDD): 9V to 38V. Input Voltage (AC): 195VAC to 265VAC, DC input voltage range of 8V to 50V is also acceptable. Output voltage: up to 730V. Operating Current: 4.5mA. Output Current:
-
Ultra-thin AC-DC ModuleInput Voltage. AC input voltage range: 85~305VAC. DC input voltage range: 100~430VDC (AC and DC, same terminal input). Output Voltage and Current. Output Voltage: 12V. Output Current: 830mA. Output
-
Open AC-DC Power ModuleAC input: 85 VAC to 264 VAC. DC input: 120 VDC to 370 VDC. DC output: 24 VDC. Maximum Output Current: 6.3 A (According to P=UI, 150W/24V≈6.25A, but considering the margin of power supply design and
-
Universal Input AC-DC ModuleSelectable range: 85~132VAC/170~264VAC or 248~373VDC by switch selection.. Output Voltage. Rated: 24VDC.. Adjustable range: 21~28V (may vary slightly in some literature, but usually within this
-
Medical Grade AC-DC Power SupplyManufacturer: MEAN WELL. Series: RPS-500. Trademark: MEAN WELL. Product Type: Switching Power Supply. Output Voltage - Channel 1: 15VDC. Output Power: 500W. Output current-channel 1: 33.3A. Input
-
High Power AC-DC Power SupplyPower: 1008W. Power density: up to 10.7 watts per cubic inch. Efficiency: High (specific efficiency values may vary depending on actual application conditions, but are typically high). Voltage
-
Constant Voltage LED Power ConverterOutput power: 50W. Output voltage: 24V DC. Output current: rated current 2.2A (also said to be 0~3.4A, depending on the actual load). Output Voltage Accuracy: ± 1%. Ripple and noise: 120mVp-p or
-
Ultra-thin LED DriverInput Voltage: Usually 220V (V), but the specific input voltage range may vary depending on different manufacturers or application requirements.. Output Voltage: 12V (V), which is the standard output
-
Low Noise Switching Power Supply ModuleInput Voltage Range: 2.7V to 5.5V. This means that the LM27762 can operate normally within this voltage range and provide a stable voltage to its output.. Output Voltage Range: ±1.5V to ±5V. The
WebFulham’s rapidly expanding line of LED drivers provides reliable, efficient solutions for virtually any situation. Constant current and constant voltage models are available, with DALI, 0-10V, and...
WebFeb 12, 2016 · The driver must also be able to handle the current. Don’t try to drive more current than the driver pin is rated for. If the current is low, a microcontroller pin can sink the LED...
WebThe CAT3661 is a high efficiency low power fractional charge pump that drives one LED with up to 5 mA of current. Soft-start current limiting and short-circuit protection are optimized for use...
WebNUD4011. Careers. 1 cart items. Custom & ASSP Wireless Connectivity. LED Drivers. PoE Powered Devices Gate Drivers AC-DC Power Conversion GFCI Controllers DDR Termination Regulators Protected...
WebPackage/Quality. The PCA9632 is an I²C-bus controlled 4-bit LED driver optimized for Red/Green/Blue/Amber (RGBA) color mixing applications. The PCA9632 is a drop-in...
WebThe CAT3661 is a high efficiency low power fractional charge pump that drives one LED with up to 5 mA of current. Soft-start current limiting and short-circuit protection are optimized for use...
